Product Overview; Hardware Features; Software Features - EnGenius ENS200EXT User Manual

P O
RODUCT VERVIEW

1.2 Product Overview

The ENS200EXT Wireless Outdoor unit provides not only
detachable antenna connectors for antenna upgrade, but also
high output power and high sensitivity can extend the transmis-
sion range to deliver a stable wireless connection. ENS200EXT
integrates 4 operation modes: Access Point, Client Bridge, Cli-
ent Router and WDS.
Advanced multi-function operation modes offer flexibility in con-
structing scalable wireless networks for all possible applica-
tions. ENS200EXT is designed to deliver reliable service under
harsh outdoor environment with certified IP65 protection and
tailored to accommodate multimedia streaming services with
data-rate up to 150Mbps. Most importantly, it is built-in encryp-
tion standards (WEP, WPA, WPA2, TKIP/AES and IEEE802.1x)
ensure maximum security and compatibility.

Hardware Features

High output power: Transmit high output power pro-

grammable for different country selections
High Data Rate: High speed transmitting rate up to

150Mbps with 1T1R 802.11n
Long range transmitting:

distance control (ACK timeout)
Signal Strength Display:

be shown as LEDs of 3 colors, making network build-up
Transmit power control and
Indicate RF signal strength to
easier. LED indicators have the best transmit and receive
signal for traffic communication
PoE Support: Support proprietary 24V passive power

over Ethernet

Software Features

Multiple SSID: 4 SSID supported. Each SSID can set

itself wireless or WAN access setting
PPPoE: Point-to-Point Protocol over Ethernet at Client

Router mode. This function will keep trying when failed or
disconnected
PPTP: Point-to-Point Tunneling Protocol (PPTP) is a

method for implementing virtual private networks
VLAN Pass-through:

Firmware Upgrade:

browser, setting are reserved after upgrade
Reset & Backup: Reset to factory default. User can

export all setting into a file via WEB
Ping & Trace Route:

Route function in Web GUI
MIB: MIB I, MIB II (RFC1213), Private MIB

SNMP: V1, V2c, V3

1-2
P
RODUCT
Support VLAN Pass-through
Upgrading firmware via web
Built-in PING function & Trace
O
VERVIEW