Garland CXBE12 Installation & Operation Manual page 25

GARLAND ELECTRIC CLAMSHELL BROILER GRILL, CXBE12 MODEL
CLEANING AND MAINTENANCE,
27. Clean areas at the far end of the broiler grate
assembly. Wipe clean with a damp cloth all the
grease accumulated in that area as illustrated
above.
28. Wipe the hinges and surrounding areas
between the cowl assembly and the grate until
clean, with a damp cloth as shown above. Avoid
catching fi ngers in the mechanism.
29. Brush upper heating
elements and areas of
heavy build-up using
broiler brush.
30. Replace upper grease
shield and return
upper broiler grate to
position.
• Raise grate to just
below lid or cowl.
• Pull knob out to allow
grate to slide into
place.
• Continue supporting
weight of grate until
knob is completely
tightened.
Part #4532096 Rev 6 (25 Oct 2013)
continuation
Note: Ensure that the upper grease shield is in
the right place aligning the two notches as shown
above.
31. Tighten knob
completely, until
bracket touches the
cowl assembly, but
do not over-tighten.
Ensure broiler grate is
tight up to the cowl
assembly. The grate
should be parallel to
the cowl assembly.
32. Discard used oil
roller pads. New ones
should be used when
assembling oil roller
for the next day.
INSTALLATION OPERATION MANUAL
(see previous latching
instructions)
Page 25