High Performance HD LED Monitor
Note: Both Y and C inputs are terminated with 75 Ohm.
Figure 5.3: Y/C Connector pin-out
Number
1
2
3
4
5.6
Connecting Audio to the Monitor
There are two (2) sets of stereo audio connectors for audio inputs, located on the rear panel.
These audio inputs are not associated with any input terminals on the rear panel, and can be
freely connected to any audio input.
5.7
Connecting the PC Signal to the Monitor
There are several ways to connect the PC signal to the monitor: HDMI, DVI, VGA and DISPLAY
PORT.
5.7.1
VGA Connection
Connect the PC signal using the VGA connector on the rear panel and a VGA cable (D-SUB to
D-SUB).
Figure 5.4: VGA Input
Pin
1
2
3
4
5
5.7.2
HDMI Connection
Connect to the HDMI (High Definition Multimedia Input) using a HDMI cable (not supplied).
Figure 5.5: HDMI Input
Bosch Security Systems
Description
Pin
Red Video
6
Green Video
7
Blue Video
8
Ground
9
Ground
10
Input
Ground
Ground
Y-signal
C-signal
Description
Red Ground
Green Ground
Blue Ground
N/A
Signal Cable Detect
User Manual
Installing the Monitor | en
Pin
Description
11
Ground
12
SDA (for DDC)
13
H-Sync or H+V Sync
14
V-Sync
15
SCL (for DDC)
2013.07 | v1.0 | F.01U.286.147
19