The Control Buttons; Setting Up The Dpf - Pandigital PAN3502W02 User Manual

The Control Buttons

You can access all of the DPF's features by using the buttons on the back of
the DPF.
Button Action
Exit the current display, or go back a screen.
SETUP/EXIT
Press button for 2 seconds to open the Onscreen Menu.
UP or
Move the selection up or left, display the previous photo, or select
Left arrow the previous file.
ENTER
Select the highlighted option, start a Slide Show, Pause or Play.
DOWN or
Move the selection down or right, display the next photo or select
Right arrow the next file.

Setting Up the DPF

The Digital Photo Frame is easy to set up, simply follow these steps:
1. Plug the AC Power Adapter into a wall outlet, and then insert the other
end into the USB/Power port on the back of the DPF.
2. Insert a memory card into the memory slot.
NOTE: The card will only fit in one direction; do not force it. The card
should fit snugly when properly inserted.
3. Press the POWER or
display the photos on the memory card.
4. To display photos individually, press
5. Press
SETUP/EXIT
6. Press
Left/Right
then press
ENTER
button; a slideshow will automatically
ON/OFF
to display the photo thumbnail screen.
arrows or
UP/DOWN
to select.
to pause slideshow.
SETUP/EXIT
buttons to highlight a photo, and
7