How To Connect The Usb Device/Ipod To Blue&Me™ Hands-Free Communication - Fiat 500 User Manual

46 BLUE&ME™ User's Manual
NOTE: Before using the player, refer to COMPATIBLE
USB STORAGE DEVICES to check that your USB
memory device is compatible with BLUE&ME™.
How To Connect The USB Device/iPod To
BLUE&ME™ Hands-Free Communication
To connect your USB device/iPod to BLUE&ME™
Hands-Free Communication, proceed as follows:
• Copy tracks on your USB device/iPod ( BLUE&ME™
recognizes.wma,.mp3 and.wav,.aac formats for audio
files and.wpl and.m3u for playlists).
• USB devices without USB wire: just connect the USB
device/iPod (directly or by an extension lead) to the
USB port on the car.
• USB devices with USB wire: use the wire to connect
the USB device/iPod to the USB port on the car.
The multimedia player does not play audio files covered
by digital rights (DRM).
• Turn the ignition key to ON. If the AUTOPLAY feature
is set to ON, BLUE&ME™ will start playback auto-
matically when a USB device is present in the USB
port.
• If AUTOPLAY is set to ON, BLUE&ME™ will start
playback automatically when a USB device is inserted
into the USB port
NOTE:
• For the best use of BLUE&ME™ it is recommended to
use USB devices with maximum capacity of 32 GB
• Indexing time will increase with the number of files
present on the media device. For a good customer
experience, a maximum total file size of 4 GB on the
media device is recommended.
• For further information refer to SETTINGS FUNC-
TION - MEDIA PLAYER.
• It is possible to use BLUE&ME™ to select and play
tracks after the media library has been built.