314 MAINTAINING YOUR VEHICLE
4. Remove the tail, stop, or turn signal bulbs by pushing
them slightly and turning counter-clockwise.
5. Remove the backup lamp bulb by pulling straight out.
6. Replace lamps as required and reinstall lamp.
FLUID CAPACITIES
Systems
Power Electronics Cooling System
Battery Thermal Management Cooling System
Single-Speed Transmission
Center High Mounted Stop Lamp (CHMSL)
1. Remove the two guard caps and the two fastening
screws.
2. Remove the center high mounted stop lamp assembly.
3. Disconnect the electric connector.
4. Remove the two screws.
5. Replace the CHMSL assembly.
6. Reinstall the two screws.
U.S.
3.6 Quarts
7.0 Quarts
0.8 Quart
Metric
3.5 Liters
6.7 Liters
750 ml