Tirefit Usage Precautions - Fiat 500e Owner's Manual

266 WHAT TO DO IN EMERGENCIES
4. Power Button
5. Mode Select Knob
6. Sealant Hose (Clear)
7. Air Pump Hose (Black)
8. Power Plug

TIREFIT Usage Precautions

• Replace the TIREFIT Sealant Bottle (1) and Sealant
Hose (6) prior to the expiration date (printed on the
bottle label) to assure optimum operation of the sys-
tem. Refer to "Sealing a Tire with TIREFIT" section (F)
"Sealant Bottle and Hose Replacement".
• The Sealant Bottle (1) and Sealant Hose (6) are a one tire
application use. After each use, always replace these
components immediately at an authorized studio.
• When the TIREFIT sealant is in a liquid form, clean water,
and a damp cloth will remove the material from the
vehicle or tire and wheel components. Once the sealant
dries, it can easily be peeled off and properly discarded.
• For optimum performance, make sure the valve stem
on the wheel is free of debris before connecting the
TIREFIT kit.
• You can use the TIREFIT air pump to inflate bicycle tires.
The kit also comes with two needles, located in the
Accessory Storage Compartment (on the bottom of the air
pump) for inflating sport balls, rafts, or similar inflatable
items. However, use only the Air Pump Hose (7) and
make sure the Mode Select Knob (5) is in the Air Mode
when inflating such items to avoid injecting sealant into
them. The TIREFIT Sealant is only intended to seal
punctures less than ¼ in (6 mm) diameter in the tread of
your vehicle.
• Do not lift or carry the TIREFIT kit by the hoses.