24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
EVSE Operation And Status Information
EVSE Status Indicators
Indicator
1 — AC Indicator LED
2 — Fault Indicator LED
3 — Charge Level
Indicator LED's
When the EVSE is first plugged in it will go through an
initialization and self test. For the first three seconds after
plugging in your EVSE all the LED's will remain off.
After approximately three seconds the EVSE performs an
internal self test and Ground Continuity Test. This pro-
cess takes approximately six seconds.
Description
Green indicates READY
RED Indicates a fault
Green indicates READY
RED indicates a fault
All ON indicates system
ready and not charging
LED's turning on and off
in sequence indicates
vehicle charging