Operating Your Vehicle; Engine Break-In Recommendations - Fiat 500 Abarth User Manual

2013
Hide thumbs Also See for 500 Abarth:
Table of Contents

Advertisement

OPERATING YOUR VEHICLE

ENGINE BREAK-IN RECOMMENDATIONS

• A long break-in period is not required for the engine and drivetrain (transmission
and axle) in your vehicle.
• Drive moderately during the first 300 miles (500 km). After the initial 60 miles
(100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
• While cruising, brief full-throttle acceleration within the limits of local traffic laws
contributes to a good break-in. Wide-open throttle acceleration in low gear can
be detrimental and should be avoided.
• The engine oil installed in the engine at the factory is a high-quality energy con-
serving type lubricant. Oil changes should be consistent with anticipated climate
conditions under which vehicle operations will occur. For the recommended
viscosity and quality grades, refer to "Maintaining Your Vehicle".
NOTE:
A new engine may consume some oil during its first few thousand miles (kilometers)
of operation. This should be considered a normal part of the break-in and not inter-
preted as an indication to an engine problem or malfunction.
Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may
result.
16
CAUTION!

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 500 abarth

Table of Contents