Table of Contents
Advertisement
Controls
They are stored and can be displayed
again later.
Viewing stored Check Control
messages
1.
Press the button on the turn signal lever
downward. "CHECK OK" or the stored
Check Control messages appear on the
display.
„CHECK OK" is shown if no messages are
present.
Check Control messages are accompanied
by text messages on the Control Display.
2.
Press the button to display additional mes‐
sages, the time and external temperature,
or the date.
Displaying stored Check Control
messages
1.
"Vehicle Info"
2.
"Vehicle status"
3.
"Check Control"
4.
Select the text message.
Messages after trip completion
Special messages that were displayed during a
trip are displayed again after the ignition is
switched off.
Speed limit
Entry of a speed limit which, when reached,
should cause a Check Control message to be
issued.
86
Displays
Online Edition for Part no. 01 40 2 918 395 - III/13
Renewed warning if the vehicle speed drops
below the set speed limit once by at least
3 mph/5 km/h.
Displaying, setting or changing the
limit
1.
"Settings"
2.
"Speed"
3.
"Warning at:"
4.
Turn the controller until the desired limit is
displayed.
5.
Press the controller.
The speed limit is stored.
Applying your current speed as the
limit
1.
"Settings"
2.
"Speed"
3.
"Select current speed"
The system adopts your current speed as the
limit.
Activating/deactivating the limit
1.
"Settings"
2.
"Speed"
3.
"Warning"
Advertisement
Table of Contents
