Table of Contents
Advertisement
Controls
Folding up backrest
Before folding up the backrest, remove the
luggage compartment roller cover, refer to
page 145, and, if necessary, slide the 2nd row
seats slightly forward.
1.
Pull the lever, refer to arrow. The backrest
is unlocked.
2.
Fold up and engage the backrest.
Ensure that the lock is securely en‐
gaged
Make sure that the catch engages se‐
curely. If it is not properly engaged, trans‐
ported cargo could enter the passenger
compartment during braking or evasive
maneuvers and endanger the vehicle occu‐
pants.◀
3.
Push the head restraints into the top posi‐
tion.
Folding backrest down
1.
Push the head restraints down, refer to
page 57.
2.
Pull the lever, refer to arrows. The back‐
rests are released.
52
Adjusting
Online Edition for Part no. 01 40 2 918 395 - III/13
3.
Fold the backrest down.
Seat heating
Front
The temperature setting progresses one step
through its control sequence each time you
press the button. The maximum temperature is
reached when three LEDs are lit.
If the trip is continued within approx. 15 mi‐
nutes, the seat heating is activated automati‐
cally with the temperature set last.
To switch off: press and hold the button.
The temperature is reduced, if need be, down
to no heat in order to reduce the load on the
battery. The LEDs remain lit.
Rear
Operation similar to front seat heating, without
temperature distribution.
Advertisement
Table of Contents
