Mp3 Cd Operation - Sanyo DTA-300M Instruction Manual

MP3 CD OPERATION

This unit can play back the CD-R/RW that has recorded music data or
MP3 files. Before playing back MP3 CD, please read the following.
MP3 CD information
- MP3 CD is the disc that standardized by ISO9660, its file name must
include 3-digits extension letters, "mp3".
- The directory and file names of the MP3 CD must be corresponded
to the ISO standardized files.
- Single-session disc can be played back.
As for multi-session disc, only the first session can be played back.
- This unit can recognize up to 255 folders or 511 files per disc.
The CD with 256 folders or 512 files and over is not available to this
unit.
- This unit can recognize up to 8 directory trees per disc.
- MP3 CD may not be played in the recorded order.
- Music section in "CD Extra" and "Mixed CD" can be played back, not
Data section.
- "Mixed CD" cannot be played back.
- Music files recorded by "Packet Writing" cannot be played back.
In this model, recommend recording setting is 128kbps of fixing bit rate.
If file are recorded in other bit rate (for example: 320kbps) or in variable
bit rate, track-jump may sometimes happen according to recording
conditions.
Limitations on display
Available letters for display are the following: capital alphabets of A
through Z, numbers of 0 through 9, and _ (underline).
MP3CD directory sample:
Playback order: song01 v song02 v ... song14
Folder number F01
MP3CD F01 albumF01
song01.mp3
song02.mp3
song03.mp3
song04.mp3
song05.mp3
F02 albumF02
song06.mp3
song07.mp3
song08.mp3
song09.mp3
song10.mp3
F03 albumF03
song11.mp3
song12.mp3
Note:
- Some MP3 CDs can not be played back depending on the recording
conditions.
- The CD-R/RW that has no music data or non-MP3 files can not be
played back.
- Do not make an empty folder. It may not work correctly.
MP3 CD OPERATION
(Using the remote control)
There is no MP3 file.The unit skips it.
douc01.doc
photo01.jpg
F04 albumF04
song13.mp3
song14.mp3
MP3 CD Play
1. Lord the MP3 CD.
"READING" then the total number of files and total number of tracks
and MP3 appear on the display.
2. Press the i button. The playback begins.
3. Press the n button to end the MP3 disc play.
Notes on track skip
- Press the e button during play to skip to the next track.
- Press the PRESET/+ 10SKIP button (or SKIP +10 on the remote
control) during play or in stop mode to skip to the next 10th track.
- Press the f button during play to skip back to the beginning of
the track currently play. Press the button again immediately to skip
back to the beginning of the previous track.
- Press the - 10 SKIP button on the remote control during play or in
stop mode to skip back 10 tracks.
-6-