Power Supply - Sanyo DTA-300M Instruction Manual

Note:
- Do not connect the AC adaptor to an AC outlet until all connections
have been made.

POWER SUPPLY

Plug one end of the AC adaptor into the DC IN socket, then plug the
other end into an AC outlet.
- Use only the supplied AC adaptor.
- The system is not completely disconnected from the mains when
the z/ON button is set to the z position.
Sub woofer output socket (SUB WOOFER)
Connect the amplified subwoofer (not supplied) to the SUB WOOFER
socket.
3
2
1 21 19 17
20 18
CONNECTIONS
CONTROLS
4 5 6 7 8 9
16 15 14 12
13 11
Amplified Subwoofer
(not supplied)
Headphones
Connect stereo headphones (not supplied) to the PHONES socket for
monitoring or for private listening. The speakers are automatically dis-
connected when headphones are connected.
1. Power button (z/ON)
2. SUB WOOFER socket (SUB WOOFER)
3. Headphones socket (PHONES)
4. CD compartment door
5. Volume buttons (- VOLUME +)
6. Bass expander button (BASS)
7. Sound preset button (SOUND)
8. Function button (FUNCTION)
9. Snooze button (SNOOZE)
10. External DC Socket (DC IN)
11. Tuner function/Band select button (TUNER/BAND)
12. Play/Pause button (i)
13. Stop button (n)
10
14. Skip/Search/Tuning buttons (f/TUNE-, e/TUNE +)
15. Open/Close button for CD compartment door (q OPEN/CLOSE)
16. Display
17. Remote sensor
18. Sleep button (SLEEP)
19. Clock/Timer button (CLOCK/TIMER)
20. Memory button (MEMORY)
21. Preset tuning/MP3 skip forward button (PRESET/+ 10 SKIP)
-2-