Power Supply - Sanyo CWM-470 Instruction Manual

Battery power operation
Install batteries.
Observe + and – signs.
8 "D" size batteries
(not supplied)
Replace lid.
CWM-460/US

POWER SUPPLY

CAUTION:
WHEN INSTALLING THE BATTERIES
To prevent leakage from the batteries,
which is corrosive and can cause personal
injury and damage to the unit, observe the
following precautions:
1. The batteries must be installed
correctly. Match the polarities (+ and –
signs) on the batteries to the polarities
shown on the back of the unit.
2. Do not mix new batteries with old or
used batteries.
3. Only use batteries of the same type
and brand.
4. If the unit will not be used for an ex-
tended period of time, remove the bat-
teries and store them in a cool place.
5. C a r e f u l l y
manufacturer's instructions for proper
use and disposal.
6. DO NOT ALLOW YOUNG CHILDREN
TO HANDLE BATTERIES.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES
MUST BE RECYCLED OR DISPOSED OF
PROPERLY IN COMPLIANCE WITH ALL
APPLICABLE LAWS.
FOR DETAILED INFORMATION, CON-
TACT YOUR LOCAL COUNTY SOLID
WASTE AUTHORITY.
-E6-
7
f o l l o w t h e b a t t e r y
28/11/2002, 16:28