Demo - Navman MY ESCAPE Series Hardware User Manual

If you want to ...
restore factory default settings,
reset the GPS,
record a GPS log of your trip,

Demo

Demo will begin when the device is connected to power via genuine Navman AC Chargers.
Complete the following:
If you want to ...
enable a shop demonstration of
Navman Spirit to be played,
enable the screen saver feature on
your Navman,
Then ...
tap Restore factory defaults.
When the warning dialog box displays, tap Yes. Your Navman
will restart.
The Restore factory defaults option allows you to restore
default factory settings; the recent locations and saved My Places
destinations on the device will be deleted.
When you restore factory defaults, your My Drive profile will
be cleared form the device.
tap Reset GPS.
When the warning dialog box displays, tap Yes.
Occasionally, the GPS fix may need to be reset. This may
occur if the receiver has been transported a long distance since last
being used; for example, to a different country, and is still trying to
establish the previous position.
tap GPS logging to turn it on or off.
Then ...
select a demonstration country from the list and tap Start.
Tap OK. Your Navman will restart.
When your Navman is in Shop demo mode, you will see the
navigation demonstration of the pre-defined route without
having to set a destination.
You cannot operate your Navman properly in Shop demo
mode.
tap Screen Saver Video.
When your Navman is idle for 10/30/60 minutes, the screen
saver will display.
The screen saver will only display if your Navman is connected
to a power supply.
59