Navman MY ESCAPE Series Hardware User Manual page 70

Complete the following:
If you want to ...
change the navigating mode,
set route type options for your
route,
set types of road options for your
route,
set the routing preference,
display the installed custom POI,
display landmarks on your route,
record mileage for your route to
generate expense reports,
record your journey,
Then ...
tap Mode to select Driving, Walking or Large vehicle.
The Large vehicle option is available only when the Large
Vehicle mode is enabled on your Navman.
tap Route type to select your route type preference from the list:
Fastest – The route that should be the fastest when
navigating.
Easiest – The simplest route with the least number of turns
and favours motorways where appropriate.
Economical – The route with least number of stops, turns and
urban areas which should save on fuel usage.
Shortest – The route with the shortest physical length.
If you do not select the preferred route type, Choose on map
is set as default for this option. All of the four route types will be
calculated after your search. Then, you have to select one route
type on the map to start navigating.
tap Types of road.
The Types of road screen will display.
Select your road preference from the list.
Avoiding ferry routes may prevent you from navigating
between certain countries, even when a bridge or tunnel exists.
tap Advanced routing to turn the Smart Route / My Drive
functions on or off.
Use historic traffic speed date: enable/disable the Smart
Route function.
Use learned driver behaviour: enable/disable the My Drive
function.
Driving speed records: display the information of your driving
speed in Motorway / Highway / Major road / Minor road.
tap Custom POI alerts.
tap Landmark guidance to turn it on or off.
tap Mileage recorder to turn it on or off.
tap Capture Journey to turn it on or off.
54