Screen; Safety - Navman MY 60T Series Hardware User Manual

Screen

Complete the following:
If you want to ...
change the displayed screen mode
change the screen brightness in day
/night mode

Safety

Complete the following:
If you want to ...
Enable/disable the warning message
after long-distance driving
enable/disable speed limit alerts,
which warn you of the speed limit
on any given road
Then ...
tap Screen mode and select:
Auto: set to automatically change between Day and Night
modes.
Day: set the screen to be displayed in Day mode.
Night: set the screen to be displayed in Night mode.
tap / on the Day brightness/Night brightness bar.
The brightness bar indicates the brightness level.
Warning: Your Navman can heat up when the brightness scale is
set high, therefore, use lower brightness whenever acceptable.
You can simply tap on the brightness bar so that the screen
brightness will be set immediately at the position you tapped.
Then ...
tap the Driver fatigue alert option to turn it on or off.
tap the Speed limit display option to turn it on or off.
tap Speed limit alerts and select:
o Off: disable the speed limit alert.
o Auto: set the system to alert automatically while your
speed is above the limit.
57