Denon DVD-3800BD Owner's Manual page 40

ENGLISH
Function Setup
Menu
Channel Level Test Tone:
Tests or sets the "Test Tone" is the test
volume for each tone which can be
speaker. output from the
speakers so that you
can adjust the volume
for each speaker.
Front Lch
Center
Front Rch
Surround Rch
Surround Back Rch
Surround Back Lch
Surround Lch
Subwoofer
SW + 10 dB
(Not available for HDMI)
Setting items Options
Off* Select "Off" to deactivate
the "Test Tone" feature.
Select "Manual", then
press [ENTER] to manually
Manual
set the volume for the
desired speaker.
Select "Auto",then press
Auto
[ENTER] to automatically
output the test tone from
each speaker.
0 dB to -12 dB If you have selected
(0 dB*) "Manual" in "Test Tone",
select the desired speaker
0 dB to -12 dB
to set and adjust the
(0 dB*)
volume for the selected
0 dB to -12 dB
speaker.
(0 dB*)
If you have selected
0 dB to -12 dB
"Auto" in "Test Tone", test
(0 dB*)
tone will be output
automatically in order.
0 dB to -12 dB
Adjust the volume of the
(0 dB*)
speaker that output the
0 dB to -12 dB
test tone.
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
Set "On" to increases the
volume level that is output
On/Off*
from the subwoofer by 10
dB.
Menu
Descriptions
Delay Time
This is a parameter
for optimizing the
timing at which the
sound is output from
the speakers
according to their
distance from the
listening position.
• Settings with (*) are the default.
• For HDMI, "None" and "Off" options for "Speaker Configuration" are not available.
• For "Delay Time", the difference among the value of the each speaker cannot exceed 4.5m (15ft).
36
ENGLISH
Setting items Options
Distance
Feet
Meters*
Front Lch 0m - 18m (3.6m*)
(0ft - 60ft (12ft))
Front Rch 0m - 18m (3.6m*)
(0ft - 60ft (12ft))
Center 0m - 18m (3.6m*)
(0ft - 60ft (12ft))
Surround Lch 0m - 18m (3.0m*)
(0ft - 60ft (10ft))
Surround Rch 0m - 18m (3.0m*)
(0ft - 60ft (10ft))
Surround Back Lch 0m - 18m (3.0m*)
(0ft - 60ft (10ft))
Surround Back Rch 0m - 18m (3.0m*)
(0ft - 60ft (10ft))
Subwoofer 0m - 18m (3.6m*)
(0ft - 60ft (12ft))
Default
Function Setup
Descriptions
Set the desired measure
system. This measure
system will be used for
"Delay Time" setting. Press
[ENTER] to switch the
setting.
Select the distance from
the listening point to the
speaker to get the ideal
delay time.
Select "Default", then press
[ENTER], to reset the
"Delay Time" setting to the
default.