Denon DVD-3800BD Owner's Manual page 39

Function Setup
Speaker Setting
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel
surround.
<Example of basic layout with 7.1ch surround system>
Front speaker (left)
Centre speaker
Subwoofer
Surround speaker (left)
Surround back speaker (left)
To make the most of its feature, set up your speakers appropriately by referring to the table below.
Speaker setting options are available at the following locations;
<Speaker setting for the audio signal output from the HDMI OUT jack >
(Available when you have HDMI cable connected to the HDMI OUT jack)
Setup A Quick A HDMI Audio Out A HDMI Multi(LPCM)
Setup A Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM)
<Speaker setting for the audio signal output from the 7.1ch AUDIO OUT jacks >
Setup A Quick A 7.1ch Audio Out A Multi Channel
Setup A Custom A Audio A 7.1ch Audio Out A Multi Channel
How to navigate through the "HDMI Multi(LPCM)" and "Multi Channel" setting
1) Use [ / ] to select the menu item.
2) Use [ / ] to select setting items.
• Use [RETURN] to go back to the previous screen.
3) Use [
• The test tone will be output. If you select "Manual", use [
• If you want to stop the test tone, press [RETURN].
4) Press [SETUP] to exit.
Front speaker (right)
Surround speaker (right)
Surround back speaker (right)
• For "Speaker Configuration", the settings of each speaker sizes may be adjusted automatically
corresponding to each setting. (e.g. If the "Front" is set to "Small", the "Subwoofer" will automatically
set to "On" and also you cannot set "Center", "Surround", and "Surround Back", to "Large".)
• If you connect to 5.1-channel surround system, set "Surround Back" in "Speaker Configuration" to
"None".
• "None" for "Center", "Surround" and "Surround Back" is not available for the speaker setting for the
audio signal output from the HDMI OUT jack .
• "Off" for "Subwoofer" is not available for the speaker setting for the audio signal output from the
HDMI OUT jack.
35
ENGLISH
/ ] to select desired options.(Except for "Test Tone" and "Default".)
For "Test Tone":
Use [ / ] to select "Manual" or "Auto", then press [ENTER].
[ / ] to adjust the volume. If you select "Auto", use [
that output the test tone.
For "Default":
Press [ENTER] to reset the "Delay Time" setting to the default.
Menu Setting items
Speaker Configuration Front
Select the desired
speaker to set. Then
Center
change the setting
appropriately by
referring to the
Subwoofer
descriptions.
Surround
Surround Back
Crossover Freq:
For speakers set to
"Small", the sound
with frequencies
below that of this
frequency are cut.
This bass sound that
has been cut is
output from the
subwoofer or a
speaker for which
"Large" is set.
ENGLISH
Function Setup
/ ] to select desired speaker, then use
/ ] to adjust the volume of the speaker
Options Descriptions
Large* Large:
For the large speakers
Small
with strong low frequency
Large*
reproduction capabilities.
Small:
Small/None
For the small speakers
On*
which do not provide
Off
strong bass sound.
None:
Large*
No speakers.
Small/None
For "Subwoofer" there is
Large*
only "On" or "Off".
Small/None
40/60/80*/ Select according to the
100/120Hz low frequency
reproduction capabilities
of the connected speaker.