Connections - Denon DVD-3800 Operating Instructions Manual

ENGLISH

4 CONNECTIONS

• Read the manuals of all the components when making
connections.
• Keep the power cord unplugged until all connections have
been completed.
• If the power is on when connections are made, noise may
be generated and damage the speakers.
(1) Connecting to a TV
• Use the included audio video cord to connect the TV's video input connector and audio input connectors to the DVD-3800's VIDEO OUT
or S-VIDEO OUT and AUDIO OUT.
DVD-3800
VIDEO OUT
SL
SR
VIDEO IN
AUDIO IN
• Connect the DVD-3800's video outputs to the TV either
directly or through an AV amplifier. Do not connect it via a
VCR (video cassette recorder). Some discs contain copy
prohibit signals. If such discs are played via a VCR, the copy
prohibit system may cause disturbance in the picture.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to
comply with your TV's video format. When the TV is NTSC
formated set to NTSC. (See page 28)
10
COMPONENT
VIDEO OUT
Y S-VIDEO OUT
1 P /C 1
B B
2 P /C 2
R R
C FL2 FL1 COAXIAL OPTICAL
SW FR2 FR1
DIGITAL OUT
AUDIO OUT
(PCM / BIT STREAM)
S-VIDEO IN
TV
L
R
NOTES:
• Be sure to connect the left and right channels properly, L
(left) to L, R (right) to R.
• Plug the power cord securely into the power outlet.
Incomplete connection may result in noise.
• Binding the power cord together with connection cords may
result in humming or noise.
REMOTE CONTROL
RS-232C ROOM TO ROOM
IN OUT
S-Video output connector
The video signals are divided into color (C) and brightness
(Y) signals, achieving a clearer picture.
If the TV is equipped with an S-Video input connector, we
recommend connecting it to the DVD-3800's S-Video
output connector using a commercially available S-Video
connection cord.
NOTES:
• To use with 2-channel audio output, set "2 CHANNEL" in
"AUDIO CHANNEL" in "AUDIO SETUP" in "SETUP" at the
initial settings. (See page 30)
• Set the "TV ASPECT" in "VIDEO SETUP" in "SETUP" to
comply with your TV's aspect. (See page 28)
• To use with video out or s-video output, set "INTERLACED"
in "VIDEO OUT" in "VIDEO SETUP" in "SETUP" at the
initial settings. (See page 28)
AC IN
To power outlet