Dimplex 6908760100 Owner's Manual page 11

Fireplace Installation
Interchangable Media
• Solid Media: Comes installed
in the firebox.
• Loose Media:
1. Remove firebox from the
wall.
2. Carefully lay the unit down
on a solid flat surface with
the front of the unit facing
down. (Figure 7)
!
NOTE:
that a protective barrier be used
underneath the unit to ensure
that the front of the frame does
not get scratched.
3. Remove the 4 screws on
each side, that secure the
trim to the firebox.
4. Lift the firebox, directly up,
off of the trim.
!
NOTE: The media is loosly
resting in the media tray and
will easily come out once the
trim has been removed.
5. Reattach the trim to the
firebox.
6. Reattach the firebox to the
wall and carefully pour and
evenly distribute the loose
media in the Media tray of
the firebox.
It is recommended
Figure 7
Figure 8
11