Advertisement
Quick Links
SSF-LUX60-BK Surround Kit
(Requires the purchase of a set of
SPL-LUX60-BK black powder coated or
SPL-LUX60-BKN black nickel plated "L" Plates)
This surround kit has been tested for use with the Heat & Glo LUX60. Check with your local building code agency before
you begin installation to ensure compliance with local codes, including the need for permits and follow-up inspections. If
you encounter any problems regarding code approvals, or if you need clarifi cation of any of the instructions contained here,
contact your Hearth & Home Technologies Inc. dealer. For the dealer nearest you, please visit www.heatnglo.com.
Figure 1
SSF-LUX60-BK Surround Kit
Note: An arrow ( ) found in the text signifi es change in content.
CAUTION! Risk of Cuts, Abrasions or Flying
Debris. Wear protective gloves and safety glasses
during installation. Sheet metal edges are sharp.
Outer
Frame
Inner
Frame
Heat & Glo • LUX60 Surround Kit • 4062-202 • Rev A • 03/09
Installation
Instructions
This kit contains:
1 Outer Frame
2 Inner Frame with Screen
3 Fastener Pack containing:
Sixteen 5/8 in. Bolts
Twelve #8 Self-tapping Screws
1
Advertisement
Related Manuals for Heat & Glo SSF-LUX60-BK
Summary of Contents for Heat & Glo SSF-LUX60-BK
- Page 1 Installation Instructions SSF-LUX60-BK Surround Kit (Requires the purchase of a set of SPL-LUX60-BK black powder coated or SPL-LUX60-BKN black nickel plated “L” Plates) This surround kit has been tested for use with the Heat & Glo LUX60. Check with your local building code agency before you begin installation to ensure compliance with local codes, including the need for permits and follow-up inspections.
- Page 2 • Remove surround frame from packaging. Be very careful • Place the bottom tabs of the inner frame into the slots to not cut into the steel frame or scratch the paint. Set on the bottom fl ange of the outer frame. Pull the spring aside.