Heart rate sensor
Moisten this side to your skin. You can wet the sensor to obtain a better reception of your pulse.
1.
Put one end of the strap through the slot of the heart
rate monitor first.
2.
Wrap the heart rate monitor and strap around your
chest. Adjust the heart rate monitor to be at the center of
your chest.
3.
Adjust the strap to fit your chest and make it tight
enough to prevent dropping while you are jogging.
4.
Put another end of the strap through the slot of the
heart rate monitor to finish the wearing.
5.
Remember to select "scan" to paring heart rate
monitor with your GB-580.
[MAIN MENU] > [CONFIGURATION] > [ACCESSORIES]
> [SENSORS] > [HEART RATE ] > SCAN.
It will show HR instead of SCAN once paring was finished.
GB-580
Outer side
Transmitter
Inner side
Page 5
Heart rate sensor