Table of Contents
Advertisement
5. Antenna Introduction
6. Getting Started
6.1 Starting Up Your GB-580
Press the Power button for 2 seconds to turn on the
device. You will see the welcome screen displayed.
Allow the GB-580 a short time to track satellites for the
first time you use it. Take your GB-580 to the outdoor
open space with a clear view to the sky and it will be easy
to acquire satellite signal with a few seconds. If the
device can't get 3D fixed, you can still press PG button to
exit the Locating screen.
System will pop up "RESET GPS" to ask you perform
cold start if can't get 3D fix for 3 minutes.
To turn off your GB-580, press the Power button for 2
seconds.
If the system frozen, press power button for 10 seconds
to do hardware reset.
GB-580
The GPS antenna is located in the lower
part of the device. Let it face to the sky for a
better reception.
Page 17
Advertisement
Table of Contents
