Turn Output On/Off; Output Name - Bosch Solution 64 User Manual

Output 1 Name O001
Is Off and Ready
Press OK or MENU
The keypad will display the following when the output is
off and missing:
Output 1 Name O001
Is Off and Ready
Connection Trouble
Press OK or MENU
The keypad will display the following when the output is
ON and OK:
Output 1 Name O001
Is ON and Ready
Press OK or MENU
The keypad will display the following when the output is
ON and missing:
Output 1 Name O001
Is ON and Ready
Connection Trouble
Press OK or MENU
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Outputs > Commands >
Turn Output On/Off
This menu allows you to turn outputs that have been programmed
by your security company on or off. These outputs can be
programmed to control outside lighting, pool pumps, watering
systems etc.
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [4] + [0] + [1].
If a valid PIN is required, the keypad will prompt you to
enter your PIN.
2. Use the [↑] and [↓] keys to select the output name
that you want to change, then press [OK] to select.
Alternatively, you can enter the output number, then
press [OK].
3. To toggle the output on or off, use the [ON] and [OFF]
keys.
The keypad will display the following when the output is
off:
Bosch Security Systems 09/06 BLCC110U
To turn the output on, press [ON].
The keypad will display the following when the output is
on:
To turn the output off, press [OFF].
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Outputs > Properties >

Output Name

This menu allows you to program the name for each output.
Each output name supports up to 16 characters.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [4] + [1] + [0].
A list of different outputs will display on the keypad.
2. Use the [↑] and [↓] keys to select the output name
that you want to change, then press [OK] to select.
Alternatively, you can enter the output number, then
MENU 4-0-1
press [OK].
The keypad will display the following:
3. Use the [←] and [→] keys to scroll the cursor left and right
across the output name text. Use the [↑] and [↓] keys to
scroll through the different characters available. To clear
all text from the cursor position to the right, press the
[OFF] key.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Solution 64 User Guide
Output 1 Name O001
Output is OFF,
To Turn ON,Press ON.
To Go Back Press OK
Output 1 O001
Output is ON,
To Turn OFF,Press OFF.
To Go Back Press OK
Output Name O001
Output 1
◄►
Press OK to SAVE

MENU 4-1-0
19