Pro-Form 415 S Treadmill User Manual page 17

THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of treadmill usage information and allows you to
select a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button, and then
release the Stop button. When the information mode is
selected, the following information will be shown:
An "E" (for English) or an "M"
(for metric) will appear in the
lower right corner of the dis-
play. Press the Speed in-
crease button to change the
unit of measurement, if de-
sired. IMPORTANT: If a "d" appears in the display, the
console is in the "demo" mode. This mode is intended
to be used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the display will remain lit, although the
buttons will not operate. If a "d" appears when the in-
formation mode is selected, press the Speed de-
crease button so the "d" disappears.
The upper left corner of the
display will show the total
number of thousands of
steps taken by all users of
the treadmill. For example,
the number 396 would indi-
cate 396,000 steps taken.
The lower left corner of the
display will show the total
number of hours that the
treadmill has been used and
the total number of miles (or
kilometers) that the walking
belt has moved, for a few seconds at a time.
To exit the information mode, remove the key from the
console.
17