Table of Contents
Advertisement
High Speed Pan/Tilt System
11.3.4
Wiper-Washer
Select UPH Pan/Tilt models have a wiper option used to operate an (external) pump for clean-
ing the glass. The spray for cleaning the glass is on the outside of the pan/tilt (see
Figure 11.16). For cleaning, the UPH must be positioned with the glass facing the spray. Start
the pump for the glass cleaning liquid and then start the wiper. It is necessary to set a preset
position corresponding to the spray which is loaded when the "wiper" function is started. For
washer models with a level sensor, the UPH displays an on-screen message when the level of
liquid in the tank is too low (only if using a pump with high discharge head from the UPTWASA
Series).
Fig. 11.16 Wiper-washer Function
Fig. 11.17 Wiper-washer Menu
ENABLED
PRESET POSITION
RELAYS NR.
PUMP DELAY
WIPER DURATION
DELAY WIPER OFF
Bosch Security Systems
WIPER-WASHER MENU
1 - ENABLED
:
NO
2 - PRESET POSITION :
00001
3 - RELAYS NR.
:
00002
4 - PUMP DELAY
:
00003
5 - WIPER DURATION :
00005
6 - DELAY WIPER OFF :
00002
Feature
Enables the wiper function.
Enables the preset position to be
reached.
Enables the relay to activate for
water pump control.
The delay between the pump com-
mand and when the wiper starts
moving.
The amount of time that the wiper
wipes.
The amount of time that the wiper
wipes without water.
Description
Instruction Manual
Configuring the System | en
Default
Options
NO
YES, NO
00001
00001 -
00250
00002
00001 -
00002
00003
00001 -
00050
00005
00001 -
00050
00002
00001 -
00050
F01U.073.990 | Version 1.0 | 2007.07
49
Advertisement
Table of Contents
