Advanced Mode: Jpeg Posting - Bosch VideoJet X10 SN Installation And Operating Manual

Network video server
Table of Contents

Advertisement

82
en | Configuration Using a Web Browser
NOTICE!
i
Duplication of data places a heavy demand on the unit and can lead to impairment of the
image quality under certain circumstances.
Port
Assign a different port to each data stream if there are simultaneous data streams at the same
multicast address.
Enter the port address of the required stream here.
Streaming
Click the checkbox to activate multicast streaming mode for the relevant stream. An enabled
stream is indicated by a check mark.
For normal multicast operation, streaming is typically not required.
Multicast packet TTL
You can enter a value to specify how long the multicast data packets are active on the
network. This value must be greater than one if multicast is to be run via a router.
5.41

Advanced Mode: JPEG Posting

You can save individual JPEG images on an FTP server at specific intervals. You can then
retrieve these images at a later date to reconstruct alarm events if required.
Image size
Select the resolution you wish the JPEG images to have:
DOC | V4.0 | 2009.06
Small
176 × 144/120 pixels (QCIF)
Medium
352 × 288/240 pixels (CIF)
Large
704 × 576/480 pixels (4CIF)
Installation and Operating Manual
VideoJet X10 SN
Bosch Security Systems

Advertisement

Table of Contents
loading

Table of Contents