Table of Contents
Advertisement
VideoJet X10 SN
Force registration now
You can force the registration by transferring the IP address to the DynDNS server. Entries
that change frequently are not provided in the Domain Name System. It is a good idea to force
the registration when you are setting up the device for the first time. Only use this function
when necessary and no more than once a day, to avoid the possibility of being blocked by the
service provider. To transfer the IP address of the VideoJet X10 SN, click the Register button.
Status
The status of the DynDNS function is displayed here for information purposes. You cannot
change any of these settings.
5.39
Advanced Mode: Advanced
The settings on this page are used to implement advanced settings for the network.
Some changes only take effect after the unit is rebooted. In this case, the Set button changes
to Set and Reboot.
1.
2.
Bosch Security Systems
Make the desired changes.
Click the Set and Reboot button. The VideoJet X10 SN is rebooted and the changed
settings are activated.
Installation and Operating Manual
Configuration Using a Web Browser | en
DOC | V4.0 | 2009.06
79
Advertisement
Table of Contents
