Table of Contents
Advertisement
58
en | Configuration Using a Web Browser
5.26
Advanced Mode: Recording Status
Certain details on the recording status are displayed here for information purposes. You
cannot change any of these settings.
5.27
Advanced Mode: Alarm Connections
You can select how the VideoJet X10 SN responds to an alarm. In the event of an alarm, the
unit can automatically connect to a pre-defined IP address. You can enter up to ten IP
addresses to which the VideoJet X10 SN will connect in sequence in the event of an alarm,
until a connection is made.
Connect on alarm
Select On so that the VideoJet X10 SN automatically connects to a predefined IP address in
the event of an alarm.
DOC | V4.0 | 2009.06
Installation and Operating Manual
VideoJet X10 SN
Bosch Security Systems
Advertisement
Table of Contents
