Table of Contents
Advertisement
38
en | Configuration Using a Web Browser
5.11
Advanced Mode: Password
A VideoJet X10 SN is generally protected by a password to prevent unauthorized access to
the unit. You can use different authorization levels to limit access.
NOTICE!
Proper password protection is only guaranteed when all higher authorization levels are also
i
protected with a password. If a live password is assigned, for example, a service and a user
password must also be set. When assigning passwords, you should therefore always start
from the highest authorization level, service, and use different passwords.
Password
The VideoJet X10 SN operates with three authorization levels: service, user and live.
The highest authorization level is service. After entering the correct password, you can access
all the functions of the VideoJet X10 SN and change all configuration settings.
With the user authorization level, you can operate the unit and also control cameras, for
example, but you cannot change the configuration.
The lowest authorization level is live. It can only be used to view the live video image and
switch between the different live image displays.
You can define and change a password for each authorization level if you are logged in as
service or if the unit is not password protected.
Enter the password for the appropriate authorization level here.
Confirm password
In each case, enter the new password a second time to eliminate typing mistakes.
NOTICE!
i
A new password is only saved when you click the Set button. You should therefore click the
Set button immediately after entering and confirming a password.
DOC | V4.0 | 2009.06
Installation and Operating Manual
VideoJet X10 SN
Bosch Security Systems
Advertisement
Table of Contents
