Connections - Bosch VIP X1600 XF Installation And Operating Manual

16 en | Installation
4.4

Connections

4.4.1 Network
You can connect the VIP X1600 XF to a 10/100/1000 Base-T network using a standard UTP
category 5 cable with RJ45 plugs. The Ethernet interfaces can be used to create one or more
redundant connections to the network.
NOTICE!
i
You cannot create a connection to a second network.
1.
2.
4.4.2 Direct iSCSI Connection
You can connect the VIP X1600 XF directly to an iSCSI system via a free ETH1, ETH2 or ETH3
interface. This connection is an alternative to using the Ethernet interfaces as a redundant
network connection. Use a UTP category 5 network cable with RJ45 plugs for a direct
connection to an iSCSI system.
NOTICE!
i
You can obtain a list of compatible iSCSI systems from your supplier or directly from Bosch
Security Systems. This list is constantly being updated and extended.
F.01U.082.088 | V3.5 | 2008.05
Connect the VIP X1600 XF to the network via the ETH1, ETH2 or ETH3 socket.
Connect the VIP X1600 XF to a redundant switch or hub on the same network via a free
ETH1, ETH2 or ETH3 socket.
Installation and Operating Manual
VIP X1600 XF
Bosch Security Systems