Service Configuration (Service Password Protected) - ACR Electronics GlobalWatch 2 AIS User Manual

3.5.6 Service Configuration (Service Password Protected)

The Service Configuration Menu allows initial configuration of the Service Password, Password
Settings (on/off), MMSI/IMO Numbers and the option of resetting the GlobalWatch
Settings.
The Service Password is required in order to enter the Service Configuration Menu. This is a higher
security level than can be reached with the User Password and therefore ensures that the Service
Configuration is protected, and limited to authorized service personnel.
Note:
The default Service Password is set at "NAUT"
It is strongly recommended to change it immediately after commencing initial GlobalWatch
operation!
Dynamic Keys: Service Configuration
[M5]
[M8]
TM
GlobalWatch AIS User Manual
2
N 1^23' E 0^17' |1>0.10|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
-----| |
| +- 1. Change Service Password
View | +- 2. User Password Settings
| +- 3. Change MMSI / IMO
-----| +- 4. Restore Factory Settings
|
Msg. |
|
-----|
|
Displ|
----------------------------------------
NUM| Select->|
Confirm Submenu
[Select]
Selection
Return to Main
[Back]
Menu
| |<-Back
[Enter]
54
TM
AIS to Factory
2
Confirm Submenu
Selection
Y1-03-0182-1A
TM
AIS
2
Version 1.0