Ship Settings (User Password Protected) - ACR Electronics GlobalWatch 2 AIS User Manual

3.5.4 Ship Settings (User Password Protected)

After a new User Password has been set, the Ship Settings may be input. The Ship Settings are
usually only set once, upon GlobalWatch
A selection is made with the cursor buttons [Up] or [Down] for input field selection. The category
"ShipType" is equipped with default settings, which can be selected by pressing the [Left] or [Right]
buttons.
Note:
The default User Password is set at "NAUT"
It is strongly recommended to change it immediately after commencing initial transponder operation!
Before entering Ship Settings for initial GlobalWatch
User Password in:
Menu 5: Configuration
Submenu 1: Change User Password
After the User Password has been set, Ship Settings may be input.
LAT:N
LON:E
Ships:21
************ Ship Settings *************
CallSign:D11233
ShipName:ANDREA DORIA
Length
Beam
RefPtExt:A200 B20 C10 D33m
RefPtInt:A190 B30 C20 D23m
ShipType: Pilot vessel
----------------------------------------
Dynamic Keys: Input of Ship Settings
[M5]
TM
GlobalWatch AIS User Manual
2
TM
2
1-18'54" ExtSOG:34.6kn 11/05/2002
0-12'21" IntCOG:173.0
A/ IntGPS: 3D
:220m
:43m
| Save | |
[Save] Confirm Data Input [M8]
AIS initial operation.
TM
AIS operation, it is advised to configure the
2
09:46:36
Region6
/\ +
/ \|
| |
| A
| x--+
| | B
+-C-+D-+
| Back
[Back]
39
Return to Main
Menu
Version 1.0
Y1-03-0182-1A