Voyage Settings (User Password Protected) - ACR Electronics GlobalWatch 2 AIS User Manual

3.5.3 Voyage Settings (User Password Protected)

Note:
The default User Password is set at "NAUT"
It is strongly recommended to change it immediately after commencing initial transponder operation!
Before entering Voyage Related Data for initial GlobalWatch
configure the User Password in:
Menu 5: Configuration
Submenu 1: Change User Password
N 1^31' E
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
Dynamic Keys: Voyage Settings (User Password Protected)
[M5]
After the Voyage Settings have been input and saved, this screen appears.
[Exit] takes the user back to the Main Menu.
N 1^30' E
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
TM
GlobalWatch AIS User Manual
2
0^24' |1>0.10|2>1.30|3>1.80nm
User password protected!
Please enter user password:
| Enter |
Confirm Password
[Enter]
Input
0^24' |1>0.10|2>1.30|3>1.80nm
Data saved.
| | |
TM
2
| | Exit
[M8] [Exit]
| <-Exit
36
AIS operation, it is advised to
Return to Vessel
Listing
Y1-03-0182-1A
Version 1.0