Transponder Configuration (User Password Protected) - ACR Electronics GlobalWatch 2 AIS User Manual

3.5.5 Transponder Configuration (User Password Protected)

The Configuration Menu allows the user to alter the hardware-based parameters. User Password
Configuration is also undertaken here.
Accessing the Configuration Settings:
The Configuration Menu is User Password protected.
Note:
The default User Password is set at "NAUT"
It is strongly recommended to change it immediately after commencing initial GlobalWatch
operation!
N 1^33' E
-----| |
View | +- 2. Region Settings
-----| +- 4. Interrogation Settings
Msg. |
-----|
Displ|
----------------------------------------
NUM| Select->|
Dynamic Keys: Transponder Configuration
[M5]
TM
GlobalWatch AIS User Manual
2
0^26' |1>01.10|2>1.30| * 1A1L
|----------------------------------
| 5. Transponder Configuration
| +- 1. Change User Password
| +- 3. Alarm Settings
| +- 5. Sensor Settings
|
|
Select desired
[Select]
Submenu
| |<-Back
[M8] [Back]
43
2
Return to Main
Menu
Version 1.0
Y1-03-0182-1A
TM
AIS