Before You Clean; Filling 2-In-1 Water Tank - Bissell DEEPCLEAN PREMIER User Manual

Operations

before you clean

1. Plan activities to give your carpet time to dry.
2. Move furniture to another area if cleaning
an entire room (optional).
3. Vacuum area with a dry vacuum cleaner
thoroughly before deep cleaning.
4. Plan your cleaning route to leave an exit path.
it is best to begin cleaning in the corner farthest
from your exit.
5. Pretreating (optional):
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet in high
traffic areas such as entryway and hallways.
To pretreat:
a. Using bissell stain Pretreat (sold
separately), generously spray evenly over
soiled area. Do not overwet.
b. Wait 3-5 minutes before deep cleaning.
c. Clean as normal using your bissell deep
cleaner, following instructions below.
filling the 2-in-1 water tank
1. Remove tank from base of machine by lifting
up tank carry handle. Carry like a bucket to
the sink.
2. Unlatch top of tank from bottom by lifting up
on tank latches on each side of the tank.
3. Fill bladder with hand hot (60°C/140°F MAX)
tap water. Do not boil or microwave water as it
can destroy the bladder.
4. Using measuring cup provided, pour two
measuring cups filled to the indicated line on
measuring cup (5 oz/138 ml total) into bladder.
NotE: Always use genuine bISSEll 2X
formulas to maximize cleaning and for the
safety of your machine.
5. Replace top of tank back onto bottom and
secure latches on both sides of tank.
NotE: Remember to secure tank latches on
each side of tank and test to make sure they
are secure before picking up tank.
6. Place tank back into machine base, seating
firmly in place.
WARNING
To reduce the risk of fire and electric shock due to
internal component damage, use only BISSELL cleaning
fluids intended for use with the deep cleaner. Non-
BISSELL cleaning solutions may harm the machine and
void the guarantee.
1.
4.
www.bissell.com
2.
5.
7