Miscellaneous - ATEN KN9108 User Manual

KN9108 / KN9116 User Manual

Miscellaneous

The functions performed by the remaining elements at the bottom of the screen
are described in the table below:
Item
Reset on exit
Reset Values
Clear Name List
52
Placing a check here causes the KN9108 / KN9116 to reset
itself and implement all the new changes when you log out.
Following the reset, wait approximately 30 to 60 seconds
before logging back in. For example, if you change the IP
address in the Network dialog box, you must open this page
and enable Reset on exit before logging out. Otherwise, the
change will not take effect.
Clicking this button undoes all changes that have been made
to the Configuration and Administration pages (except for port
names, usernames, and passwords) and returns the
parameters to the original factory default settings (see OSD
Factory Default Settings, page 136).
This function clears the Port Names on the Main page.
Description