Customization; Login Failures; Working Mode - ATEN KN9108 User Manual

Customization

The Customization dialog box is arranged in four major sections:

Login Failures

Allowed: sets the number of consecutive failed login attempts that are
permitted from a remote computer.
Timeout: sets the amount of time a remote computer must wait before
attempting to login again after it has exceeded the number of allowed
failures.

Working Mode

If Stealth Mode is enabled, the KN9108 / KN9116 refuses ICMP "echo
request" packets.
To permit browser access to the KN9108 / KN9116, click to put a check
mark in the Enable Browser checkbox. If browser access is not enabled,
users will not be able to log into the unit via their browsers.
To permit multiple users to simultaneously access the KN9108 / KN9116,
check Enable multiuser operation.
If Force all the grayscale is enabled, the remote displays of all devices
connected to the KN9108 / KN9116 are changed to grayscale. This can
speed up I/O transfer in low bandwidth situations.
If Enable black background is checked, the remote OSD displays on a
black background.
Chapter 4. Administration
49