Nº38S Bottom-Panel Label; Operating Voltage - Mark Levinson 38S Operating Manual

Operating Voltage

The Nº38S Preamplifier is set at the factory (internally) for 100V, 120V,
200V, 230V, 220V, or 240V AC mains operation @ 50 or 60Hz. ( 230V/
50Hz only in European Union countries, in compliance with CE
regulations. ) This voltage setting cannot be changed by the user.
Make sure that the label on the bottom panel of the Nº38S (adjacent
to the AC cord) indicates the correct AC operating voltage for your
location.
If the voltage indicated on your Nº38S is incorrect, or if you wish to
change the AC operating voltage of your Nº38S as the result of
moving to a different country than the one in which you purchased
your digital audio processor, see your Mark Levinson dealer.
The Nº38S can be powered by a normal 15-ampere AC mains line. If
other devices are also powered from the same AC line, their
additional power consumption should be taken into account.
8