Download Print this page

HP J9311A Specification page 51

3500 and 3500 yl series

Advertisement

QuickSpecs
Accessory Product Details
HP X132 10G SFP+ LC ER
Transceiver (J9153A)
The SFP+ ER Transceiver
will transmit 10Gbps over
up to 40km using standard
OM3 fiber cable. This
product expands the HP
Networking transceiver
portfolio for connections
from 0m to 40km. Use only
genuine HP transceivers
with your HP Networking
equipment to ensure
reliability and support.
Notes
Services
Ports
Connectivity
Physical characteristics
Environment
Electrical characteristics Power consumption
Cabling
Notes
Services
DA - 13282 Worldwide — Version 19 — December 9, 2013
2-300m with 50 µm multimode cable @ 2000 MHz*km
Cable length
Fiber type
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Refer to the HP website at
www.hp.com/networking/services
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-ER); Duplex: full only
Connector type
Wavelength
Dimensions
Weight
Transceiver form factor
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
typical
Power consumption
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
40km
Fiber type
Check switch release notes for minimum version of software required to
support this transceiver.
Some switches have limits as to how many of this particular transceiver can
be installed. See the release notes of the switch software/firmware being
used for more details.
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 3500 and 3500 yl Switch Series
2-300m
Multi Mode
LC
1550 nm
2.22(d) x 0.55(w) x 0.47(h) in. (5.65 x 1.39 x 1.19
cm)
.04 lb., Fully loaded
SFP+
32°F to 158°F (0°C to 70°C)
5% to 95%, noncondensing
-40°F to 185°F (-40°C to 85°C)
5% to 95%, noncondensing
up to 10,000 ft. (3 km)
1.3 W
1.5 W
Single Mode
www.hp.com/networking/services
for details on
for details on
Page 51

Advertisement

loading