Advertisement
QuickSpecs
Technical Specifications
Physical characteristics
Memory and processor
Mounting and enclosure
Performance
Environment
Electrical characteristics Frequency
Safety
DA - 13282 Worldwide — Version 19 — December 9, 2013
Supports a maximum of 4 10-GbE ports, with optional module
Dimensions
Weight
10G module
Management Module
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching
capacity
Switch fabric speed
Routing table size
MAC address table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Description
Maximum heat
dissipation
AC voltage
Current
Idle power
Maximum power rating
PoE power
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
HP 3500 and 3500 yl Switch Series
17.44(w) x 15.43(d) x 1.73(h) in (44.3 x 39.2 x 4.4
cm) (1U height)
14.11 lb (6.4 kg)
ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR
SDRAM
Stackable memory and processor: Freescale
PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB
compact flash, 256 MB DDR SDRAM
< 3.4 µs (FIFO 64-byte packets)
< 2.1 µs (FIFO 64-byte packets)
up to 75.7 million pps
101.8 Gb/s
105.6 Gb/s
10000 entries (IPv4)
64000 entries
32°F to 131°F (0°C to 55°C); 32°F to 104°F (40°C)
when used with any X2 10-GbE
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 15,000 ft (4.6 km)
Power: 55.1 dB, Pressure: 44.8 dB ISO 7779, ISO
9296
50/60 Hz
The switch automatically adjusts to any voltage
between 100-127 and 200-240 V with either 50 or
60 Hz.
865 BTU/hr (912.9 kJ/hr)
100-127/200-240 VAC
10.0/5.0 A
98 W
623 W
398 W
Page 24
Advertisement
