Advertisement
QuickSpecs
Accessory Product Details
HP X122 1G SFP LC BX-U
Transceiver (J9143B)
A small form-factor
pluggable (SFP) Gigabit-BX
(bi-directional) "upstream"
transceiver that provides a
full-duplex Gigabit solution
up to 10 km on one strand
of single-mode fiber. The
J9143B connects to the
J9142B "downstream"
transceiver, or to any IEEE-
standard 1000BASE-BX10-
D ("downstream")
device.
HP X130 CX4 Optical
Media Converter (J8439A)
An optical media converter
that connects to CX4 ports,
providing 10-Gigabit
connectivity up to 300 m
on multimode fiber.
Ports
Physical characteristics
Environment
Cabling
Notes
Services
Physical characteristics
Cabling
Notes
DA - 13282 Worldwide — Version 19 — December 9, 2013
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U); Duplex:
full only
Dimensions
Weight
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE-
standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U
transceiver can only connect to a 1000-BX-D product. You cannot connect two
1000-BX-U transceivers together.)
Power consumption is 1 watt maximum.
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Dimensions
Weight
Maximum distance:
• 62.5 µm multimode cable @ 150 MHz*km = 1-50 m
• 50 µm multimode cable @ 500 MHz*km = 1-100 m
• 50 µm multimode cable @ 2000 MHz*km = 1-300 m
Duplex: full
The CX4 Media Converter connects directly to the CX4 port, and a 12-strand
multimode ribbon cable is used between CX4 Media Converters.
The 12-strand multimode ribbon cable can have either 62.5 or 50 micron core
diameters, terminated by standard Multiple Terminations Push-pull Latch
(MTP) connectors in a crossover configuration. The ribbon cables are known as
Multi-fiber Push (MPO).
Users should specify a "crossover" (often called "key up/key up")
configuration for the ribbon cable. Also, specify female-female cables to
connect to ProCurve 10-GbE CX4 Media Converters.
For a suggested vendor of MPO ribbon cables, please see the "Cabling"
HP 3500 and 3500 yl Switch Series
2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18
cm)
0.04 lb. (0.02 kg)
32ºF to 158ºF (0ºC to 70ºC)
0% to 95%, non-condensing
–40ºF to 185ºF –40ºC to 85ºC)
www.hp.com/networking/services
2.83(d) x 0.98(w) x 0.59(h) in. (7.19 x 2.49 x 1.5
cm)
.06 lb. (0.03 kg)
for details on
Page 46
Advertisement
