Customizing Your Machine; General Description; Setting The Fax Parameters - Panasonic Panafax UF-4000 Operating Instructions Manual

Customizing Your Machine

General Description

Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the
Parameter Table, are preset for you and do not need to be changed. If you do want to make a change, read
the table carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily
changed by simple key operation just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be
changed by the procedure described below.

Setting the Fax Parameters

1
2
3
4
5
6
NOTE
32
7
4
Enter Fax Parameter number from the Parameter Table.
Ex: 0 1 for CONTRAST
Enter the new setting value or press
Ex: for LIGHTER
2
To set another parameter, press
Step 3 or press
STOP
1. To scroll the Fax Parameters in Step 2, press
2. To print out a Fax Parameter List, see page 92.
.
CLEAR to return to
to return to standby.
SET MODE
NO.=❚ (01-99)
NO.=01 (01-99)
NORMAL<>
LIGHTER<>
RESOLUTION?
or .
(1-8)