Customizing Your Machine - Panasonic UF-490 Service Manual

8.7.

Customizing Your Machine

General Description
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the
Parameter Table, are preset for you and do not need to be changed. If you do want to make a change, read
the table carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily
changed by simple key operation just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be
changed by the procedure described below.
Setting the Fax Parameters
1
2
3
Enter Fax Parameter number from the Parameter Table.
Ex:
4
5
Enter the new setting value or press
Ex:
6
To set another parameter, press
Step 3 or press
NOTE
7
4
0 1 for CONTRAST
for LIGHTER
2
to return to standby.
STOP
To scroll the Fax Parameters in Step 2, press
.
to return to
CLEAR
or
245
SET MODE (1-8)
NO.= (01-99)
NO.=01
(01-99)
NORMAL<>
LIGHTER<>
RESOLUTION?
.