LifeSource UA-767T Instruction Manual page 9

TAKING YOUR BLOOD PRESSURE
6.
It is normal for the cuff to feel very tight. You will see all
the display symbols appear briefly. As the cuff pressurizes,
blinking numerals—starting at zero—are displayed. When
inflation is complete, the MEASUREMENT IN PROGRESS
symbol blinks and beeps with each pulse beat.
NOTE: If you wish to stop inflation at any time, press START button.
7.
Wait for the long beep indicating the measurement is
complete. The systolic and diastolic pressure readings
and pulse rate are then displayed and announced before
the cuff deflates.
8.
Assuming a systolic reading of 120, a diastolic
of 73 and a pulse of 69, the announcement
would say: "Your blood pressure is 120 over
73 and pulse is 69."
The announcement repeats four times
before the monitor automatically shuts off.
You may also stop the announcement and turn off the monitor
at any time by pressing the START button. To increase the
volume of the announcement, move the VOLUME CONTROL
switch (see diagram, page 4) to the right. To lower the
volume, move the switch to the left.
9 LifeSource Health Line (Toll-Free): 1-888-726-9966