How 767T Works; Before You Start - LifeSource UA-767T Instruction Manual

?

HOW 767T WORKS

LifeSource Blood Pressure Monitors are easy to use, accurate
and digitally display full measurement readouts. Our technology
is based on the "oscillometric method" — a noninvasive blood
pressure determination. The term "oscillation" refers to any
measure of vibrations caused by the arterial pulse. The cuff is first
inflated until the artery is fully blocked. Then, the monitor takes
measurements while the cuff deflates. Our monitors examine the
pulsatile pressure generated by the arterial wall as it expands and
contracts against the cuff with each heartbeat.
You must install 4 type AA (1.5 volt) batteries and attach the
cuff to the monitor before using it. To install batteries (or replace
them if the "Low Battery" symbol appears on display), proceed
as follows:
1.
Remove battery compartment cover
by gently pushing down on arrow and
sliding cover forward.
2.
Put in top row of batteries first. Place
the batteries in compartment with
positive (+) and negative (–) terminals
matching those indicated in the
compartment. Be sure batteries make
contact with compartment terminals.
3.
Replace cover by sliding it into
the compartment and gently pressing
into place.
?
5

BEFORE YOU START

LifeSource Health Line (Toll-Free): 1-888-726-9966