Agilent Technologies EasyEXPERT Manual page 573

25 PowerBJT
Stop Mode: Sweep stop mode. SKIP AT ANY ABNORMAL, STOP AT ANY ABNORMAL or CONTINUE
AT ANY
[Measurement Parameters]
Collector Current: IC
Base Voltage: VBE
Collector Voltage: VCE
[User Function]
hFE: DC current gain
[Auto Analysis]
[X-Y Plot]
X axis: Base voltage VBE (LINEAR)
Y1 axis: Collector current IC (LINEAR)
Y2 axis: DC current gain hFE (LINEAR)
[List Display]
Base voltage: VBE
Collector current: IC
DC current gain: hFE
Base current: IB
Collector voltage: VCE
SearchStat: Status of search termination. 1: Search target is found. -1: Outout voltage over its limit. -2:
Measured voltage over its limit. -3: Measured current over its limit. -4: Oscillation or ohter abnormal status is
detected. -5: Search loop count over its limit.
[Parameter Display Area]
Agilent EasyEXPERT Application Library Reference, Edition 8
25-13