Console Redirection Submenu; Boot Menu; Boot Device Priority Submenu - NEC Express5800 120Ld User Manual

Console Redirection Submenu

Feature
Serial Port Address
Baud Rate
Flow Control
Console
Connection

Boot Menu

Use the up or down arrow keys to select a device, then press the <+> or <->
keys to move the device higher or lower in the boot priority list.
Boot Device Priority Menu
Boot Priority
1.
2.
3.
4.
3-14 Configuring Your System
Choices or
Display Only Description
Disabled
If enabled, the console will be
Serial Port 2 redirected to this port.
(3F8h/IRQ4) If console redirection is
Serial Port 2 enabled, this address must
(2F8h/IRQ3) match the settings of serial
port 2.
57.6K Enables the specified baud
19.2K
rate.
No Flow Control
Enables flow control.
XON/OFF
Direct Indicate whether the console is
Via Modem connected directly to the
system or a modem is used to
connect.
Device Description
ATAPI CD-ROM Attempts to boot from an
Drive ATAPI CD-ROM drive.
Diskette Drive Attempts to boot from a
diskette drive.
Hard Drive Attempts to boot from a hard
drive device.
Intel UNDI, PXE- Attempts to boot from
2.0 (Build 071) diagnostic boot partition of the
flash memory.
Your Setting
Your Setting