Table of Contents
Advertisement
Troubleshooting
1. How do I verify if the driver is installed correctly?
To verify if the driver for the wireless adapter is installed correctly, follow the steps below.
Step 1
Right-click on My Computer from your desktop and choose Properties.
Step 2
Select the Device Manager tab. (For Windows 2000/XP, select the Hardware tab
first then click on Device Manager).
Step 3
Expand Network adapters and verify that IEEE 802.11g CARDBUS Wireless
Network Adapter is in the list and that no yellow question mark or exclamation mark is
beside it.
Step 4
Close the Device Manager. If you do not see IEEE 802.11g CARDBUS Wireless
Network Adapter in the list, try to reinstall the driver again.
2. The computer does not recognize the CARDBUS adapter.
Make sure that the CARDBUS adapter is properly seated in the computer's CARDBUS
bus slot. If there are additional free CARDBUS slots, try to install the CARDBUS adapter
in those slots.
3. The CARDBUS adapter does not work properly after the driver is installed.
Restart the computer. In some cases, it will be necessary to restart the computer after
installing the driver. If the device is not working properly and a yellow exclamation mark is
displayed, then there is probably a resource conflict. In this case, make sure the computer
system has a free IRQ and if necessary, uninstall the driver, restart the system, and repeat
the driver installation procedure.
22
Advertisement
Table of Contents
